COYOTE MODEL # 3PH-ALL


Coyote 3 phase panel mount pump protector
LARGE CLEAR OPENINGS
EASILY HANDLE BIG WIRE

  THIS ONE MODEL SERVES ALL
OF THESE VOLTAGES AND HORSEPOWER RANGES:
       208 Volts          1/3 - 60 HP

       230 Volts          1/3 - 75 HP
       380 Volts          1/3 - 125 HP
       460 Volts          1/3 - 150 HP
       575 Volts          1/3 - 200 HP
 
 
TO CHOOSE OPERATING VOLTAGE SIMPLY ATTACH THE YELLOW WIRE IN THE UPPER LEFT CORNER TO A SCREW ON THE TERMINAL STRIP.

COYOTE WILL PROTECT THE PUMP AND MOTOR FROM:
     PHASE LOSS OR REVERSAL
     LOW OR HIGH VOLTAGE
     OVERCURRENT
     RAPID CYCLING
     RUNNING DRY

 
PHASE AND VOLTAGE FAULTS ARE QUICKLY SENSED AND RESET TIME IS ONE MINUTE AFTER PROPER POWER IS RESTORED.

ON OVERLOAD COYOTE TRIES TWICE 60 SECONDS APART TO RESTART.  IF THE OVERLOAD CONTINUES COYOTE'S OVERLOAD LIGHT GOES FROM ON STEADY TO BLINKING, AND NO FURTHER RESTARTS ARE ATTEMPTED SO AS NOT TO BURN OUT A MOTOR WINDING. 

IF THE PUMP RUNS DRY COYOTE SHUTS IT DOWN WITHIN ONE SECOND AND WILL RESTART THE PUMP AFTER A DELAY OF 1 MINUTE TO 12 HOURS DIALED ON THE TIMER.

IN THE EVENT OF A POWER OUTAGE COYOTE WILL RESTART FOUR TO TEN SECONDS AFTER POWER IS RESTORED. THIS RANDOM START FEATURE IS DESIGNED TO PREVENT MANY PUMPS SERVED BY A SINGLE POWER SOURCE FROM ALL RESTARTING AT THE SAME INSTANT. THERE IS NO NEED TO READJUST THE COYOTE.

ALL OPERATE ON EITHER 50 OR 60 HERTZ.  NO NEED TO SPECIFY VOLTAGE OR HORSEPOWER. COYOTE OPERATES ANY MOTOR IN THE VOLTAGE AND HORSEPOWER RANGES SHOWN.

AVAILABLE FOR PANEL MOUNTING (AS PICTURED HERE) OR IN NEMA 3R OR 4X ENCLOSURE WITH OR WITHOUT MAGNETIC CONTACTOR/STARTER OR H.O.A. SWITCH.

Click here for technical specification sheet.                               WWW.COYOTEMFG.COM